LA2Xi
Amplified controller for install
Architecture |
Single-ended (SE) mode: 4 x 4 Bridge (BTL and PBTL) modes: 4 x 3, 4 x 2 or 4 x 1 |
Output Power |
4 x 640 W at 4 ohms (SE) 4 x 360 W at 8 ohms (SE) 2 x 1260 W at 8 ohms (BTL) 1 x 2550 W at 4 ohms (PBTL) |
Power supply | Universal SMPS with PFC |
Inputs | Milan-AVB, AES/EBU, Analog |
Network | Milan-certified with seamless network redundancy |
Inspiration
![All Creation Sings in 360° Immersive Sound with L-Acoustics L-ISA at Museum of the Bible featured image](https://www.l-acoustics.com/wp-content/uploads/2024/08/la-museum-of-the-bible-1-768x512.jpg)
All Creation Sings in 360° Immersive Sound with L-Acoustics L-ISA at Museum of the Bible
KS21
L-ISA
L-ISA Immersive
LA2xi
X8
![NUS University Cultural Centre is First Venue in Singapore to be Equipped with Immersive L-ISA Audio System featured image](https://www.l-acoustics.com/wp-content/uploads/2024/04/la-ucc-1-768x432.jpg)
NUS University Cultural Centre is First Venue in Singapore to be Equipped with Immersive L-ISA Audio System
5XT
A15i
A15i Focus
A15i Wide
KS21
L-ISA Processor
LA2xi
LA4X
LA7.16
LS10
P1
SYVA
X8
Need more information?
![](https://www.l-acoustics.com/wp-content/themes/l-acoustics/static/img/asset/icon-cloud-download.png)
Check out our Documentation Center for more documentations on this product.
Amplification and power supply
Amplification class | High-efficiency class D |
Output power, all channels loaded | 4 x 640 W at 4 ohms (SE) 4 x 360 W at 8 ohms (SE) 4 x 190 W at 16 ohms (SE) 2 x 1260 W at 8 ohms (BTL) 1 x 2550 W at 4 ohms (PBTL) |
Power supply model | Universal Switched Mode Power Supply (SMPS) with Power Factor Correction (PFC) |
Mains rating | 100 V - 240 V ±10%, 50-60 Hz |
External DSP backup voltage input | 24 V DC |
DSP
Digital Signal Processor (DSP) | Gen.4 Dual SHARC 32-bit, floating point, 96 kHz sampling rate |
I/O routing | Flexible 4x4 routing matrix |
Per output channel | Built-in EQ station with 8 IIR, 4 FIR linear phase EQ filters Array morphing, Air absorption compensation filters Internal IIR and FIR EQ algorithms L-DRIVE advanced system protection Output delay from 0 to 1000 ms |
Technologies
loudspeaker management | L-DRIVE advanced system protection |
Latency
standard latency (analog/digital inputs) | 3.84 ms |
low latency (analog/digital inputs) | 0.84 ms |
Inputs
Milan-AVB | 4 channels from 1 stream (of up to 8 channels) |
AES/EBU | 4 channels AES/EBU (2 x AES3) with SRC |
analog | 4 channels |
connections | 2 etherCON 1 Gb/s I/O+ control 4 male 3-point terminal blocks (2 x switching analog/AES3) 2 male 3-point terminal block AES3 active links Optional I/O-CON panel |
Outputs
loudspeaker connections | 2 Female 4 point terminal blocks Optional I/O-CON panel |
Circuit protection
Mains and power supply | Over and under voltage / over temperature / overcurrent |
Power outputs | Overcurrent / DC / short circuit / over temperature |
Interface
display/indicators | LED's only |
Control and monitoring
L-Acoustics remote control software | LA Network Manager |
General purpose inputs and outputs (GPIO) | 4 in/out on 10 point terminal block |
External DSP backup voltage input | 24 V DC / 0.5 A on 2-point terminal block |
Third-party management solutions | Q-SYS® / Crestron® / Control4® / Savant®/ SNMP / Extron® |
Operating conditions
Temperature | -5º C / 23º F to +50º C / 122º F |
Physical data
Height | 1U |
Weight | 4.4 kg / 9.7 lb |
Protection rating | IP30 |
Dimensions